dust collectors and fume extractors
     
   
Printing - Graphic Arts
 

Isolation Rooms
Subsequent to helping contain the SARS outbreak in Canada and China in 2004, Quatro began working closely with the Canadian and Quebec Government Department of Health, in conjunction with CDC Guidelines, to develop a more specific system to address this type of emergency. The main scope of the project was quite clear: to design a system that allows any facility to convert ordinary patient rooms into isolation environments in minutes. Secondary goals included automatic control of negative room pressure, complete & guaranteed sealing to ensure zero by-pass around filters, portability, noise levels below 54 DBA and the ease of installation of system/HEPA cartridge filters. Each of these goals was treated as a separate project with various groups focusing on a specific task to create a hospital friendly system. Beta tests were conducted in hospital environments to receive feedback from microbiologists, facilities engineers, politicians, design engineers, building and hospital planners and, especially, nurses who will be working closely to deploy and maintain these systems.

The Medical Industry
Whether your needs are Patient Isolation, General Purification, Particulate/Odor Source Capture, or Dust Collection, a QUATRO environmental air purifier will make a noticeable difference. QUATRO has designed a wide range of units geared towards the medical profession. Targeting a host of harmful germs, viruses, bacteria, micro-organisms, chemicals and odors, QUATRO's medical grade HEPA filters, highly adsorbent gas-phase chemical filters and/or germicidal UV lights work collectively to provide a truly hygienic environment.

 
Equipment Articles
 
Positive-Negative Pressure Environments
Odor and/or Debris Capture
Micro-Environmental Filtration
Humidification
Accessories
 
 
QUATRO in the Medical Industry
Isolation units have "CSA Medical" approval
Montreal Gazette "SARS Article" ( 04/2003 )
Journal de Montreal "SARS Article" ( 04/2003 )
Reference Letter - Markham Stouffville Hospital
Reference Letter - Sunnybrook Woman's College
odor-debris-capture
Page 1 of 2
 
AA055    
ClearView   Description
Quatro Air AA055 ClearView  
  • Eliminates contaminants / debris from breathing zone
  • Contains all contaminants within enclosure
  • Can be connected to dust collector or purifier
  • Side opening suited for working with a lathe
  • Flexible rubber wiper gaskets contain contaminants yet provide quick easy hand access
  • Can be supplied with 2.5"dia, 3", 4"dia or blankoff plate
  • 14.5"h x 15"w x 17"d
Large View N/A    
     
AA099    
ClearView (WideFormat)   Description
Quatro Air AA099 ClearView  
  • Wide format containment unit
  • Eliminates odor or debris from breathing zone
  • Contains contaminants within enclosure
  • Reversible side opening suited for working with a lathe
  • Flexible rubber wiper gaskets contain contaminants yet provide quick easy hand access
  • Can be supplied with 2.5"dia, 3", 4"dia or blankoff plate
  • 14.5"h x 24"w x 17"d
Large View N/A  
     
H277    
PlexiGlass Fume Trap   Description
Quatro Air H277 PlexiGlass Fume Trap  
  • Plexiglass hood connects to Solderpure, Monopure or any other source capture equipment
  • Captures and maintains odors within enclosure
  • PN:H277-Plexiglass hood, 8"h x 12"w x 4"deep, 4" dia. conn. in back
  • PN:H408-Plexiglass hood, 5"h x 18"w x 5"deep
  • PN:H278-8 - 8ft. Long Fume Hose
Large View N/A    
     
A080    
MC2 (Micro Coordinated Controller)   Description
Quatro Air A080 MC2  
  • Excellent for use with ALL dust collectors
  • Micro-controller coordinates on/off control of dust collectors with up to 2 micromotors or sandblaster or LATHE
  • Automatic "Dust-Delay" safety feature extends dust collection for remaining airborne particles after micromotor stops for a few more seconds
  • Can be used with any dust collector (up to 10 amps)
  • Works with any lathe less than 5amps
Click image to enlarge    
     
A101    
Air-Port Attachment   Description
Quatro Air A101 Air-Port Attachment  
  • Mobile ergonomic attachment with "Wrist-Rest" comfort cushion
  • Provides total mobile bench-top versatility
  • Built-in cushion top enhances comfort and manual dexterity
  • Sleek ergonomic design reduces hand fatigue
  • PN: A101 = 2.5" collar, PN: AA041 = 3" collar
  • 3-1/4"h x 12"w x 9.5"d
Click image to enlarge    
     
AA102    
Illuminated Air-Port   Description
Quatro Air AA102 Illuminated Air-Port  
  • Features Illuminated work surface
  • FlexShield safeguards technician from particles entering breathing zone
  • Mobile ergonomic attachment with "Wrist-Rest" comfort cushion control
  • Provides total mobile bench-top versatility
  • Built-in cushion top enhances comfort and manual dexterity
  • Sleek ergonomic design reduces hand fatigue
  • PN: AA102 = 2.5" collar, PN: AA042 = 3" collar
  • 12"h x 12"w x 9.5"d
Click image to enlarge    
     
AA083-2.5    
Illuminated Splash Guard   Description
Quatro Air AA083 Illuminated Splash Guard  
  • C/w face-shield to keep particles from breething zone
  • Flourescent light illuminated polishing area
  • C/w ON/Off swith
  • Available with 2.5" dia or 3" dia rear air connection
  • PN: AA083-2.5 = 2.5" collar, PN: AA083-3 = 3" collar
  • 12"h x 8"w x 10"d
Click image to enlarge    
     
AA083-2.5S    
Illuminated Splash Guard - With Plastic Tray   Description
Quatro Air AA083-2.5S Illuminated Splash Guard - With Plastic Tray  
  • C/w face-shield to keep particles from breething zone
  • Flourescent light illuminated polishing area
  • C/w ON/Off swith
  • C/w plastic splash pan
  • PN: AA083-2.5S = 2.5" collar, PN: AA083-3S = 3" collar
  • 12"h x 8"w x 12-1/2"d
Large View N/A    
     
AA005    
Adjustable Mobile Arm (For Unit Mounting)   Description
Quatro Air AA005 Adjustable Mobile Arm  
  • For overhead collection of dust & odor
  • Intake tube 24" long with clear nozzle
  • Connects directly onto a unit
  • Table-bracket sold separately for workbench tabletop mounting
  • PN:AA005-w/o slidegate
  • PN:AA006-c/w slidegate
Click image to enlarge    
     
A103    
AirTop   Description
Quatro Air A103 AirTop  
  • Connects to front of workbench
  • Can be securely fitted to Bench-Mount Slide Bar
  • Built-in clear safety guard
  • Can be used for both 2.5" & 3" collar applications
  • 11"w x 6-1/2"d
Click image to enlarge    
     
AA075    
In-Drawer Suction   Description
Quatro Air AA075 In-Drawer Suction  
  • Ergonomic attachment with "Wrist-Rest" comfort cushion
  • Low profile design allows it to be placed in drawer
  • 2"h x 10"w x 6.5"d
  • 1.5" dia inlet connection
   
 

Debris
HEPA
Humidity
Odor
   
     
 
   
© OP-Studio - Quatro Air Technologies 2008-2009 All Rights Reserved